Indicators?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
mattjc
- Settled in member
- Posts: 131
- Joined: Tue Feb 24, 2009 9:08 pm
- Location: West London
Indicators?
Just a quick one really, My indicators take a little while to start blinking, i.e use the switch and wait 10 - 15 secs and the blinking begins... Any ideas / fixes?
Ta
Matt
Ta
Matt
-
veefer400
- Familiar Member
- Posts: 408
- Joined: Fri Jul 25, 2008 4:36 pm
- Bike owned: Ducati 900SS, 1978 Cafe 400/4
- Location: Trowbridge, Wilts
Re: Indicators?
Use the switch earlier. 
-
veefer400
- Familiar Member
- Posts: 408
- Joined: Fri Jul 25, 2008 4:36 pm
- Bike owned: Ducati 900SS, 1978 Cafe 400/4
- Location: Trowbridge, Wilts
Re: Indicators?
But seriously - I would suggest a lazy relay, all connectors & bulbs must be fine or they wouldnt work at all...
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: Indicators?
It's a common fault - take the switch apart and give it a really good clean (contact cleaner is best).
You'll be amazed at the crud you find in there.
You'll be amazed at the crud you find in there.
"It's just a ride" Bill Hicks
-
rob b
- Settled in member
- Posts: 111
- Joined: Wed Sep 15, 2010 10:46 pm
- Bike owned: nc30
- Location: anglesey, north wales
Re: Indicators?
Hi.
Mine was like that & then they stoped working.
I took the switch off on the handle bars just 2 x screws sprayed contact cleaner into were the switch is a few times & they worked after that. If it dose'nt work fist time try again don't spray to much in & let it dry for a few minutes. It worked for me.
Hope the helps.
Cheers.
Rob.
Mine was like that & then they stoped working.
I took the switch off on the handle bars just 2 x screws sprayed contact cleaner into were the switch is a few times & they worked after that. If it dose'nt work fist time try again don't spray to much in & let it dry for a few minutes. It worked for me.
Hope the helps.
Cheers.
Rob.
-
mattjc
- Settled in member
- Posts: 131
- Joined: Tue Feb 24, 2009 9:08 pm
- Location: West London
Re: Indicators?
lol - tried that... got fed up on the larger roundabouts!veefer400 wrote:Use the switch earlier.
-
mattjc
- Settled in member
- Posts: 131
- Joined: Tue Feb 24, 2009 9:08 pm
- Location: West London
Re: Indicators?
Cheers guys, will get the contact cleaner out... again!