Front Brake Issue
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 32
- Joined: Wed May 12, 2010 3:08 pm
- Bike owned: VFR400 NC24
- Location: Ireland (NI)
Front Brake Issue
Hi,
I've noticed lately theres a knock coming from the front when I drive over bumpy roads and when I looked a bit closer I seen the bolt which connects the front left brake calliper to the fork (from sitting on bike) looked a bit loose. There was a small gap and I could move it with my hand. Trouble is the bolt's head is out of shape and I cannot move it easily.
Ive attached a couple of pics to give you a better idea of what im talking about. Should this space be there? What type of bolt should be used? The bolt on the other side is different..
http://yfrog.com/3vdsc00421gpj
http://yfrog.com/izdsc00422kuj
I've noticed lately theres a knock coming from the front when I drive over bumpy roads and when I looked a bit closer I seen the bolt which connects the front left brake calliper to the fork (from sitting on bike) looked a bit loose. There was a small gap and I could move it with my hand. Trouble is the bolt's head is out of shape and I cannot move it easily.
Ive attached a couple of pics to give you a better idea of what im talking about. Should this space be there? What type of bolt should be used? The bolt on the other side is different..

http://yfrog.com/3vdsc00421gpj
http://yfrog.com/izdsc00422kuj
- thunderace
- Site Supporter
- Posts: 1584
- Joined: Fri Sep 10, 2010 9:03 pm
- Bike owned: R6, YZF600R
- Location: Blackburn, Lancs.
Re: Front Brake Issue
That gap should be there but the bolt shouldn't be loose. The outer part of the bracket is just a collar for the head of the bolt. The bolt is a normal socket screw M8 x (IIRC) 25mm length.
-
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Front Brake Issue
What is with the bottom bolt.. it should be a smaller allen-bolt.. looks like somebody has been bodging things.
It pivots on there, you can undo the lower allen bolt (normal bolt) in your case and swing it up.. as long as there is no side-play it should be ok.
Maybe your knock is elsewhere..
It pivots on there, you can undo the lower allen bolt (normal bolt) in your case and swing it up.. as long as there is no side-play it should be ok.
Maybe your knock is elsewhere..
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
- Site Supporter
- Posts: 836
- Joined: Mon May 11, 2009 3:25 pm
- Bike owned: NC30
Re: Front Brake Issue
That allen bolt looks well chewed
- thunderace
- Site Supporter
- Posts: 1584
- Joined: Fri Sep 10, 2010 9:03 pm
- Bike owned: R6, YZF600R
- Location: Blackburn, Lancs.
Re: Front Brake Issue
Are you sure the knock isn't bearing related?
-
- Settled in member
- Posts: 31
- Joined: Mon May 31, 2010 6:52 pm
Re: Front Brake Issue
That bolt looks knacked, you'll probably want to replace it but obviously need to get it out first. Screw extractor should do it :-)
-
- Site Supporter
- Posts: 1292
- Joined: Thu Nov 20, 2008 1:09 pm
Re: Front Brake Issue
Sounds like a front mudgard rattle to me,
Check the mounts on the forkleg.
Check the mounts on the forkleg.
- superlite
- Site Supporter
- Posts: 748
- Joined: Wed Apr 30, 2008 11:52 pm
- Bike owned: TLS, LB80 x 2
- Location: Australia
- Contact:
Re: Front Brake Issue
hunter wrote:Sounds like a front mudgard rattle to me,
Check the mounts on the forkleg.


'Take it to the Back'
-
- Settled in member
- Posts: 32
- Joined: Wed May 12, 2010 3:08 pm
- Bike owned: VFR400 NC24
- Location: Ireland (NI)
Re: Front Brake Issue
I checked the front guard and its secure and doesnt rattle.hunter wrote:Sounds like a front mudgard rattle to me,
Check the mounts on the forkleg.
I think the front bearings need changed as there is a slight groan at times but would this cause a knocking noise when going over bumps??
-
- Settled in member
- Posts: 229
- Joined: Tue Sep 08, 2009 9:05 am
- Bike owned: NC30,
- Location: Nr Dover, Kent
Re: Front Brake Issue
You need to get the front wheel off the ground and see if there is any play/movement in your head bearings, if there is, you will feel/hear knocks over bumps!pf85 wrote:I checked the front guard and its secure and doesnt rattle.hunter wrote:Sounds like a front mudgard rattle to me,
Check the mounts on the forkleg.
I think the front bearings need changed as there is a slight groan at times but would this cause a knocking noise when going over bumps??