Leaking filler cap

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
chownsy
Familiar Member
Posts: 307
Joined: Mon Aug 16, 2010 10:17 am
Bike owned: KS125, ER5,VFR400 NC24
Contact:
Contact chownsy
Re: Leaking filler cap

Post by chownsy »

rickyb_dj wrote:have you painted inside the where the cap meets the tank when closed?
Painted with the tank sealer only

Also ordered some genuine bearings when at the bike shop so could get the bits and fix it, £58 + post and VAT :@

Wish i had waited and ordered of Wemoto (didnt see them listed when i checked on my phone :( )

Phoned the bike shop and they said they wont cancel the order either :(
Top
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: Leaking filler cap

Post by Neosophist »

Erm...the sounds a rip off.

The standard roller bearings are

Part# 91015KT8005 for the top one [£11.50 instock @ David Silver Spares]
http://www.davidsilverspares.co.uk/part ... ber_15496/

Part# 91016KT8005 for the bottom one [£17.50 instock @ Davild Silver Spares]
http://www.davidsilverspares.co.uk/part ... ber_15497/

£34.08 inc VAT

Your bike shop sounds like a proper rip-off.

Tapered needle rollers are probably better, and work out cheaper too! Least you have some anyway now.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
Top
Post Reply

Return to “Honda - General”