refreshing old looking plastic
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
refreshing old looking plastic
The little things like the fairing infills ect look old and dated, is there any product out there that will bring them back up like new or is it easyer to just get them sprayed?
-
- Settled in member
- Posts: 72
- Joined: Sat Aug 09, 2008 4:36 pm
- Location: Oxfordshire
Re: refreshing old looking plastic
Get yourself down halfords and get yourself some back to black and apply it with a clean cloth.
Works wonders on any tired plastic bumpers etc
Works wonders on any tired plastic bumpers etc
-
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: refreshing old looking plastic
iv got some proper detail trim restorer, but it doesnt make much of a diffrence, the fairing infills are a gloss finnish
- BillingCBR
- Site Supporter
- Posts: 1043
- Joined: Sat Oct 10, 2009 10:36 pm
- Bike owned: '88 NC23, NC30, '98 R1, NC35
Re: refreshing old looking plastic
try heating them up (gently!) with a hair drier, used it before on some plastic bits and it came up ok. You could get some carbon ones though 

-
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: refreshing old looking plastic
i have been looking at the carbon ones but £100 seems abit steep, and i need some new forks and other bits before i start buying stuff like that.BillingCBR wrote:try heating them up (gently!) with a hair drier, used it before on some plastic bits and it came up ok. You could get some carbon ones though
-
- Site Supporter
- Posts: 780
- Joined: Sun May 04, 2008 9:07 am
- Location: glasgow
Re: refreshing old looking plastic
have tried various stuff autoglym plastic restorer back to black etc got some sonax plastic restorer as used by big stink in his restoration see (page 7} its more of a paint/dye than a polish have used it on an undertray with good results.
Last edited by Dynamohum on Sun Oct 10, 2010 9:31 pm, edited 1 time in total.
- royster81
- NWAA Supporter
- Posts: 2509
- Joined: Wed Apr 30, 2008 8:04 pm
- Bike owned: VFR400R-L NC30 CBR400RR-R NC29
- Location: Belfast,Northern Ireland
Re: refreshing old looking plastic
i use Tesco's own dash spray and over time it does darken things down, maybe you should just hang in there with the likes of back to black and it'll pay off. but i'd steer clear of painting them.
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
-
- Site Supporter
- Posts: 780
- Joined: Sun May 04, 2008 9:07 am
- Location: glasgow
Re: refreshing old looking plastic
in agreement royster re painting them the last thing you want is them looking like a 10 min job some boy racer has done on his bumpers with a halfords plastic paint . but if they are badly bleached this is really good stuff providing you prep the plastics thoroughly getting all the old wax silicon off first .
-
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: refreshing old looking plastic
i was worried about repainting them, the sonax looks like its worth a try. thanks for the help 

- banoffee
- Site Supporter
- Posts: 1247
- Joined: Sat Aug 01, 2009 7:44 am
- Location: Surrey
- Contact:
Re: refreshing old looking plastic
bike spray, the stuff that comes in a black tin with muc-off kits. works a treat on black plastic - have used it on everything from bike parts to under car bonnets and it works a treat.
attention 2 detail - bike valeting and more