C Spanner for rear shock preload -
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
benny1380
- Settled in member
- Posts: 23
- Joined: Fri May 02, 2008 7:22 pm
- Location: Thurrock, Essex
C Spanner for rear shock preload -
Im going to fit the jack up linkage for rear shock from Rick Oliver, and need the c spanner to adjust the shock, can i use the spanner for the chain adjustment or can i improvise with screwdriver and hammer (carefully!)
And any important things to note whilst doing this mod?
Cheers,
Benny
And any important things to note whilst doing this mod?
Cheers,
Benny
-
CMSMJ1
- Moderators
- Posts: 7161
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: C Spanner for rear shock preload -
get a proper tool - you know it makes sense.
Tyhe chain one is too big and a screwdiver will not work very well.
I bought one from my local shop for a fiver - made by progressive suspension.
I'll bet you can get an adjustable C panner for cheap enough from Halfrauds if you are stuck.
Tyhe chain one is too big and a screwdiver will not work very well.
I bought one from my local shop for a fiver - made by progressive suspension.
I'll bet you can get an adjustable C panner for cheap enough from Halfrauds if you are stuck.
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate