Carb vacuum - NC24
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
thunderace
- Site Supporter
- Posts: 1584
- Joined: Fri Sep 10, 2010 9:03 pm
- Bike owned: R6, YZF600R
- Location: Blackburn, Lancs.
Carb vacuum - NC24
Does anyone know what vacuum NC 24 carbs should be running?
I can't afford a set of gauges so I'm going to make a set (my dad is in the precision instruments trade). I just need to know what range gauges to get.
Most of the gauges I've seen online have a range of 0.0 to -0.6 bar.
I can't afford a set of gauges so I'm going to make a set (my dad is in the precision instruments trade). I just need to know what range gauges to get.
Most of the gauges I've seen online have a range of 0.0 to -0.6 bar.
-
MexicanGringo
- Familiar Member
- Posts: 315
- Joined: Sun May 25, 2008 10:41 am
- Bike owned: '30
- Location: Durban, RSA
Re: Carb vacuum - NC24
My gauges for a NC30 are 0 to -100kPa, but to avoid bad flutter the needle only gets to around -20kPa, so get something 0 to -40 for decent resolution