NC30 total loss

gilly1 · Post by **gilly1** » Sun Oct 03, 2010 2:46 pm

Hi,
im building a nc30 race bike and want to run total loss. what do i need to remove? do i need the rectifier?
any help welcome.
Thanks Andrew

Post by **CMSMJ1** » Sun Oct 03, 2010 3:25 pm

Now then..
You need to remove the genny, rotor and all charging wiring - incluing the reg rec.

Also, a goo idea to fir optimate leads so you can charge the bike between sessions.

It works very well...and is as easy as described.

999Gomerz · Post by **999Gomerz** » Mon May 16, 2011 9:38 am

Does anyone have a schematic for the loom on an NC30 with Total Loss please?

Thanks.

g-force performance · Post by **g-force performance** » Mon May 16, 2011 6:51 pm

999Gomerz wrote:Does anyone have a schematic for the loom on an NC30 with Total Loss please?

Thanks.

No Scheamtic Necessary. Just unplug and leave.

Mike Norman
G-Force Engine Development
http://www.mngforce.com

Post by **CMSMJ1** » Mon May 16, 2011 10:36 pm

Or, if you really want to remove some wiring

The generator wires
the reg rec wires

I just removed the burned plug from ym reg rec and left the genny unplugged (as it is attached to the stator coil anyways)

total loss works...

NC30 total loss

NC30 total loss

Re: NC30 total loss

Re: NC30 total loss

Re: NC30 total loss

Re: NC30 total loss