New Fork Springs Required.....

[PARUS]

Durka, I'd be a bit warey of that, R model forks are completely different. I'd speak to Graeme.

I also think so, because R model has cartridge forks.

Yea you right, I should go to the man who should know what I need, why is life so blooming difficult sometimes.

thanks

Dave

On one our GSXR1000 we use longer springs with shorter spacer for the race purpose. Hope this is help...

[Davez29]

Graeme has not answered my email so far but I also emailed Hagon who quoted me a set with fork oil under £80 delivered.

They gave me two options..

With rebound adjusters: 35.50mm diameter / 450mm length / using sae10w oil with
a 150mm air gap ( this dispenses with the spacers tubes.

Or

Without rebound adjusters: 35.20 diameter / 322mm length / using sae10w oil with
a 160mm air gap

Does these look right for an NC29? Obviously I would be looking at the top option but they are somewhat longer than what are in now, although they do say you dispense with the spacers, also why different diameters?

Anyone fitted Hagon?

dave

[GF Racing]

Have replied now - been on holiday .....

Regards