Aluminium foil on fairings

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
chownsy
Familiar Member
Posts: 307
Joined: Mon Aug 16, 2010 10:17 am
Bike owned: KS125, ER5,VFR400 NC24
Contact:

Aluminium foil on fairings

Post by chownsy » Tue Sep 21, 2010 11:04 am

I remember seeing ages ago on a set of fairings someone had stuck aluminium foil to the inside of them to help keep the plastic cool and stop the paint cracking from the engine heat.

A roll of foil is cheap, would you advise doing this to my fairings to help improve there life?

User avatar
CRM
Admin NWAA
Admin NWAA
Posts: 2972
Joined: Sat Apr 05, 2008 2:06 pm
Location: NorthWest
Contact:

Re: Aluminium foil on fairings

Post by CRM » Tue Sep 21, 2010 12:36 pm

its a bi thicker than domestic foil. more like the self stick stuff used to joint plasterboard.
Insert Signature Here

chownsy
Familiar Member
Posts: 307
Joined: Mon Aug 16, 2010 10:17 am
Bike owned: KS125, ER5,VFR400 NC24
Contact:

Re: Aluminium foil on fairings

Post by chownsy » Tue Sep 21, 2010 12:55 pm

CRM wrote:its a bi thicker than domestic foil. more like the self stick stuff used to joint plasterboard.
I wish i had thought about it before, i could have nicked all the off cuts from the days i worked at marcus sportcars

User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent

Re: Aluminium foil on fairings

Post by Drunkn Munky » Tue Sep 21, 2010 2:26 pm

That silver stick on insulation foil they sell in B&Q or wickes should do the trick

chownsy
Familiar Member
Posts: 307
Joined: Mon Aug 16, 2010 10:17 am
Bike owned: KS125, ER5,VFR400 NC24
Contact:

Re: Aluminium foil on fairings

Post by chownsy » Tue Sep 21, 2010 2:50 pm

Drunkn Munky wrote:That silver stick on insulation foil they sell in B&Q or wickes should do the trick

Rightio then, ill have a looksie in there trade catalogue


In screw fix they have Radiator Reflector foil but it has to be glued on :(

We used to use contact adeshive on the car chassis with the heat proof material and then taped the edges.

If i can find the foil tape then i could do the same on this with the reflector stuff as its only £7 for 5m

User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent

Re: Aluminium foil on fairings

Post by Drunkn Munky » Tue Sep 21, 2010 3:14 pm

Let me know what you decide on as i need to do the fairings on my gsxr before any more paint bubbles up after the so called dream machine didnt refit the heat protection when it was painted :down:

chownsy
Familiar Member
Posts: 307
Joined: Mon Aug 16, 2010 10:17 am
Bike owned: KS125, ER5,VFR400 NC24
Contact:

Re: Aluminium foil on fairings

Post by chownsy » Tue Sep 21, 2010 3:35 pm

Drunkn Munky wrote:Let me know what you decide on as i need to do the fairings on my gsxr before any more paint bubbles up after the so called dream machine didnt refit the heat protection when it was painted :down:

Just priced it up just under £20 for it, so going to do it and save money having to repaint the paintwork from heat damage.

Screwfix numbers:
35529 - £9.35 - tape
10612 - £6.86 - rad insulation
51081 - £2.99 - adhesive

User avatar
porndoguk
Site Supporter
Site Supporter
Posts: 3293
Joined: Wed Jun 16, 2010 11:17 pm
Bike owned: NC30
Location: Middle England
Contact:

Re: Aluminium foil on fairings

Post by porndoguk » Tue Sep 21, 2010 7:35 pm

chownsy wrote:
Drunkn Munky wrote:Let me know what you decide on as i need to do the fairings on my gsxr before any more paint bubbles up after the so called dream machine didnt refit the heat protection when it was painted :down:

Just priced it up just under £20 for it, so going to do it and save money having to repaint the paintwork from heat damage.

Screwfix numbers:
35529 - £9.35 - tape
10612 - £6.86 - rad insulation
51081 - £2.99 - adhesive
hold your horses kiddo i have some self adhesive foil/insul tape used for pipe laggin,

let me know how much you need and ill dig you some out,
NC30 & NC23 33BHP Restrictors For Sale
£25 Inc P&P and donation to 400GB PM for more details


http://www.bikerstraining.com

Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK

chownsy
Familiar Member
Posts: 307
Joined: Mon Aug 16, 2010 10:17 am
Bike owned: KS125, ER5,VFR400 NC24
Contact:

Re: Aluminium foil on fairings

Post by chownsy » Tue Sep 21, 2010 7:54 pm

ideally i need to do both side fairings as i dont want my paintwork getting damaged from the heat off the engine.

and thanks for the offer :grin:

User avatar
porndoguk
Site Supporter
Site Supporter
Posts: 3293
Joined: Wed Jun 16, 2010 11:17 pm
Bike owned: NC30
Location: Middle England
Contact:

Re: Aluminium foil on fairings

Post by porndoguk » Tue Sep 21, 2010 8:12 pm

chownsy wrote:ideally i need to do both side fairings as i dont want my paintwork getting damaged from the heat off the engine.

and thanks for the offer :grin:
its the £8.99 thingy youve looked at screwfix,
i have posibly about 10m going spare which should see you fit?
NC30 & NC23 33BHP Restrictors For Sale
£25 Inc P&P and donation to 400GB PM for more details


http://www.bikerstraining.com

Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK

Post Reply