Vacume pipe nipple type thingy :)

Post by **Drunkn Munky** » Wed Sep 15, 2010 6:40 pm

Anyone have or know the part number for the thingy that screws into the head for the vacume pipe to attach to?

graham72 · Post by **graham72** » Wed Sep 15, 2010 6:50 pm

Cant help, but top description!

Post by **thunderace** » Wed Sep 15, 2010 6:51 pm

Could you make a bleed nipple fit?

I've done it with other bikes and a 7mm nipple

graham72 · Post by **graham72** » Wed Sep 15, 2010 6:59 pm

Is it not shown amongst this lot???

http://www.akhara.com/nc30/nc30parts/

Post by **Drunkn Munky** » Wed Sep 15, 2010 7:15 pm

I have gone through those parts lists but I can't see it.

Could make one to fit but be less hassle just to order the right part from Honda

Post by **ibby4585** » Wed Sep 15, 2010 7:23 pm

Tony,

Ive had a look on my part list i cant find it either.

Im sure Geoff will have one.

Kris

Post by **skinnydog0_0** » Wed Sep 15, 2010 7:39 pm

Hi Tony,
The rvf part No. is 16214 - MB0 - 000
It's the number for the vacume draw off nut on the intake side of the head on cylinder 3.
They have them on David Silvers for £2.50
HTH
Jeff

arsey30 · Post by **arsey30** » Wed Sep 15, 2010 7:52 pm

Best order the 5mm I/D aluminium washer, 90452 323 000 as well.

Dave.

Post by **skinnydog0_0** » Wed Sep 15, 2010 7:56 pm

arsey30 wrote:Best order the 5mm I/D aluminium washer, 90452 323 000 as well.

Dave.

Top man, well spotted

Post by **Drunkn Munky** » Wed Sep 15, 2010 8:01 pm

Vacume pipe nipple type thingy :)

Vacume pipe nipple type thingy :)

Re: Vacume pipe nipple type thingy :)

Re: Vacume pipe nipple type thingy :)

Re: Vacume pipe nipple type thingy :)

Re: Vacume pipe nipple type thingy :)

Re: Vacume pipe nipple type thingy :)

Re: Vacume pipe nipple type thingy :)

Re: Vacume pipe nipple type thingy :)

Re: Vacume pipe nipple type thingy :)

Re: Vacume pipe nipple type thingy :)