CRANKCASE BREATHER PIPE DIMENSIONS (nc35)

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
dengus
Settled in member
Posts: 46
Joined: Tue Jun 23, 2009 3:55 pm
CRANKCASE BREATHER PIPE DIMENSIONS (nc35)

Post by dengus »

Hi!!
I would like to know the dimensions of the pipe that goes from the crankcase to the air box.
I have istaled a tyga front tank cover and i have been told that i should put a K&N CRANKCASE BREATHER AIR FILTER to allow more air....
What do you think about this???
Thanks in advance.
Top
User avatar
superlite
Site Supporter
Site Supporter
Posts: 748
Joined: Wed Apr 30, 2008 11:52 pm
Bike owned: TLS, LB80 x 2
Location: Australia
Contact:
Contact superlite
Re: CRANKCASE BREATHER PIPE DIMENSIONS (nc35)

Post by superlite »

I use 16 mm (5/8") diameter hose.

There's no real reason that you'd need to stick a filter on the crank case, but there's no reason not to either :P I recall a few on here doing it in the past.

But personally I wouldn't feel comfortable knowing that oil can potentially vent all over the engine - even though it is unlikely. I run my breather to a catch tank under the seat unit where it can't escape (if it feels the need).
'Take it to the Back'
Top
Post Reply

Return to “Honda - General”