I been looking on ebay for a decent set of brake and clutch levers for my VFR400 NC24 but i dont seem to be able to find any like the ones availible for the NC30 (cnc levers from Hong kong)
I was wondering whether they would fit a NC24.
Regards
Richard
NC24 v NC30 control levers
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
chownsy
- Familiar Member
- Posts: 307
- Joined: Mon Aug 16, 2010 10:17 am
- Bike owned: KS125, ER5,VFR400 NC24
- Contact:
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: NC24 v NC30 control levers
Should do.
The NC24 clutch lever is the same as on the NC30, The brake lever can be fitted too so I don't see why not, i've fitted an NC30 adjustable brake lever to my NC24
The actualy handlebars themselves are different though as the NC24 has 37mm forks and the NC30 has 41mm forks so the clamp is larger.
The NC24 clutch lever is the same as on the NC30, The brake lever can be fitted too so I don't see why not, i've fitted an NC30 adjustable brake lever to my NC24
The actualy handlebars themselves are different though as the NC24 has 37mm forks and the NC30 has 41mm forks so the clamp is larger.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
chownsy
- Familiar Member
- Posts: 307
- Joined: Mon Aug 16, 2010 10:17 am
- Bike owned: KS125, ER5,VFR400 NC24
- Contact:
Re: NC24 v NC30 control levers
Neosophist wrote:Should do.
The NC24 clutch lever is the same as on the NC30, The brake lever can be fitted too so I don't see why not, i've fitted an NC30 adjustable brake lever to my NC24
The actualy handlebars themselves are different though as the NC24 has 37mm forks and the NC30 has 41mm forks so the clamp is larger.
Rightio, Thank you for that reply, Looks like ill be picking up a set of the levers :)