Rick's radiators - fitted, pictures -
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
superlite
- Site Supporter
- Posts: 748
- Joined: Wed Apr 30, 2008 11:52 pm
- Bike owned: TLS, LB80 x 2
- Location: Australia
- Contact:
Re: Rick's radiators - fitted, pictures -
Mmmm... Very nice! Must do the same.
'Take it to the Back'
-
gonzothegreat
- Site Supporter
- Posts: 200
- Joined: Wed May 26, 2010 10:32 pm
- Location: Hampton Wick - UK
Re: Rick's radiators - fitted, pictures -
the radiators are a direct fit, no issues what so ever. Hoses are all ok, same place, same position etc...
Drunkn Munky wrote: Oh and also on the other side one of the coolent pipes runs in a slightly different place which doesnt match up with the cutout/moulding on the panel, doesnt really notice to be honest but if you have a nicely painted set of bodywork id think about sorting this as it wont do your paint anygood.
-
Claytonbojo
- Settled in member
- Posts: 93
- Joined: Fri Jul 16, 2010 5:41 pm
- Bike owned: VFR NC30 NSR125, Pit bike 200C
- Location: Worth Sussex
Re: Rick's radiators - fitted, pictures -
how much dose this improove? u no how common the NC30s like to over heat all the time with a new radiator will that stop that from happenin? and wot is so special about them SAMCO radiator pipes?
-
gonzothegreat
- Site Supporter
- Posts: 200
- Joined: Wed May 26, 2010 10:32 pm
- Location: Hampton Wick - UK
Re: Rick's radiators - fitted, pictures -
I have now finished fitting the fairing, no clearance issues.
No idea yet if it is money well spend or not, the radiator cores are about 8 mm thicker.
I'll you know about any improvements next week.
No idea yet if it is money well spend or not, the radiator cores are about 8 mm thicker.
I'll you know about any improvements next week.
-
alexwitham
- Site Supporter
- Posts: 1340
- Joined: Wed May 20, 2009 10:04 pm
- Bike owned: 675R, GSXR6, NC30
- Location: Norwich
Re: Rick's radiators - fitted, pictures -
Good work, they look great.
-
porndoguk
- Site Supporter
- Posts: 3293
- Joined: Wed Jun 16, 2010 11:17 pm
- Bike owned: NC30
- Location: Middle England
- Contact:
Re: Rick's radiators - fitted, pictures -
samco just stronger walled, can handle higher pressure, lighter, higher temp resistant and abrasion, oil and some chemical resistance resitant, and look the part, work especially well on inlet side of intercooled turbos! i need some for my zafira but they come with a hefty price tag, and a hell of a job to fit to the VXClaytonbojo wrote:how much dose this improove? u no how common the NC30s like to over heat all the time with a new radiator will that stop that from happenin? and wot is so special about them SAMCO radiator pipes?
-
dx400r
- Site Supporter
- Posts: 307
- Joined: Mon Aug 25, 2008 1:41 pm
