Shiny G-Force part has arrived!

[Neosophist]

Im not worried about doing a bit of wiring but im also adding switchgear for road use which again isnt to hard to wire up but if a standard loom comes up cheap it may just be quicker to put that in, im building from a bare frame up so swapping the loom isnt gunna be hassle.

I wouldnt mind paying £110 for the reg if its not going to shit itself every 5 mins, money well spent IMO, where ya get it from?

Get a 2002-2005 R6 regulator! you can pick em up for £20.00'ish


http://cgi.ebay.co.uk/YAMAHA-R6-REGULAT ... 4a9de7fd91" onclick="window.open(this.href);return false;

Dataracer uses and recommended them and i've had no problems since :-)

[Cammo]

Yep, I've replaced all my honda reg recs with (used!) yam units and no more issues - ever!

I'll happily endorse them over ANY honda reg rec!

[Drunkn Munky]

Sweet, id heard of the R6 reg mod before but didnt know if it worked with the g-force setup aswell. Maybe a silly question but why not use a GSXR reg with the kit???

[Neosophist]

Sweet, id heard of the R6 reg mod before but didnt know if it worked with the g-force setup aswell. Maybe a silly question but why not use a GSXR reg with the kit???

I guess it'd work fine! The Stator loom should also plug right in (providing it's long enough)

I don't know why the R6 Reg / Rec was picked? Maybe becuase it has similar characteristics to the NCxx R/R's being 5 wire 3 phase *shrug*

These R/R's are phsyically a lot bigger than stock so cool better but require a little bit of modding to fit.

*touching wood* the one i've fitted to my 24 winter project is solid as a rock. Output voltages are constant 14.2 no matter what the revs are. Battery's new and takes a great charge. All is good. The bikes running a GSXR stator

[Drunkn Munky]

Cheers for the info, i'll give the R6 reg a try at that price

[dave_c24]

Sorry to drag this thread back up but people may be iterested that ive just listed my gsxr conversion kit on ebay,

Search 'vfr 400 nc30 lightweight flywheel kit'

They are a great bit of kit. This is not the g-force kit, it just bolts on no mods to origional parts required

[ibby4585]

Sorry to drag this thread back up but people may be iterested that ive just listed my gsxr conversion kit on ebay,

Search 'vfr 400 nc30 lightweight flywheel kit'

They are a great bit of kit. This is not the g-force kit, it just bolts on no mods to origional parts required

Ive just spotted this on Ebay and ive out into my watching list!, discount for members!!

[dave_c24]

Sorry to drag this thread back up but people may be iterested that ive just listed my gsxr conversion kit on ebay,

Search 'vfr 400 nc30 lightweight flywheel kit'

They are a great bit of kit. This is not the g-force kit, it just bolts on no mods to origional parts required

Ive just spotted this on Ebay and ive out into my watching list!, discount for members!!

Lol , fraid not, its going to help fund a new bike, looking for a cbr 600 or maybe a yamaha thundercat

[Drunkn Munky]

Buy it fella, these dont come up that often and i brought the last one g-froce had. Not sure if they've produced more yet but i gather mike is quite busy. Great piece of kit.