nc30 screen mounting
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
matt_vfr
- Site Supporter
- Posts: 106
- Joined: Fri Jul 18, 2008 6:30 pm
- Bike owned: '89 NC30
- Location: Earls Colne, Essex
nc30 screen mounting
Quick question really... how is the nc30 screen attached to the top fairing as standard? Ive got a set of black number plate screws holding it on and its been like that since i bought it. Its starting to bug me that its not right so can anyone enlighten me as to how to "fix" this please 
Matt
Matt
-
pugparcels
- Site Supporter
- Posts: 367
- Joined: Wed Feb 25, 2009 5:17 pm
- Bike owned: nc30 & 929 fireblade
- Location: worcester - where the sauce comes from
Re: nc30 screen mounting
pretty sure it is riveted.
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: nc30 screen mounting
Yep, pretty sure there rivited.
The NC24 screen is rivited into place.
The NC24 screen is rivited into place.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
matt_vfr
- Site Supporter
- Posts: 106
- Joined: Fri Jul 18, 2008 6:30 pm
- Bike owned: '89 NC30
- Location: Earls Colne, Essex
Re: nc30 screen mounting
With what, pop rivets and washers?!? I thought they were but it sounds a bit pikey to me! Might have to pick up a set of those pro-bolt ones on ebay for 8.99
-
turbo tel
- Settled in member
- Posts: 22
- Joined: Sun May 02, 2010 2:35 pm
Re: nc30 screen mounting
matt_vfr wrote:With what, pop rivets and washers?!? I thought they were but it sounds a bit pikey to me! Might have to pick up a set of those pro-bolt ones on ebay for 8.99
Hey my bike does not look pikey
-
porndoguk
- Site Supporter
- Posts: 3293
- Joined: Wed Jun 16, 2010 11:17 pm
- Bike owned: NC30
- Location: Middle England
- Contact:
Re: nc30 screen mounting
ive always used black m6 number plate bolts,
but this time i used m6 A2 AFK5 allen bolts and the plastic m6 number plate bolt so they dont crush.
but this time i used m6 A2 AFK5 allen bolts and the plastic m6 number plate bolt so they dont crush.
-
matt_vfr
- Site Supporter
- Posts: 106
- Joined: Fri Jul 18, 2008 6:30 pm
- Bike owned: '89 NC30
- Location: Earls Colne, Essex
Re: nc30 screen mounting
Lol, sorry bout that, no offence meantturbo tel wrote:matt_vfr wrote:With what, pop rivets and washers?!? I thought they were but it sounds a bit pikey to me! Might have to pick up a set of those pro-bolt ones on ebay for 8.99
Hey my bike does not look pikey
Doesn't seem very honda though!-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: nc30 screen mounting
Matt.
I wouldnt rivet it. For two reasons oem nose cones (as we know are brittle) it might clamp it up too tight and crack the nosecone and secondly if you scratch or crack the screen its a pain in the arse to re-drill all the rivets and get it off. Just get some tastynuts pro bolt screen screws job done!!
kris
I wouldnt rivet it. For two reasons oem nose cones (as we know are brittle) it might clamp it up too tight and crack the nosecone and secondly if you scratch or crack the screen its a pain in the arse to re-drill all the rivets and get it off. Just get some tastynuts pro bolt screen screws job done!!
kris
-
dirty30-2008
- Settled in member
- Posts: 51
- Joined: Thu Jul 01, 2010 12:16 pm
- Bike owned: NC 30, TZR 250
- Location: Portsmouth
Re: nc30 screen mounting
Hi Matt,
I seem to remember that they were riveted on as standard with a flat headed rivet and special washer on the inside,Part no 64206-MLO-700 PIN,SCREEN SETTING
64206-MJO-000 NUT, SPEED SETTING
Type them into David silver part no search to see if they are still available.
Regards, Rob.
I seem to remember that they were riveted on as standard with a flat headed rivet and special washer on the inside,Part no 64206-MLO-700 PIN,SCREEN SETTING
64206-MJO-000 NUT, SPEED SETTING
Type them into David silver part no search to see if they are still available.
Regards, Rob.
-
matt_vfr
- Site Supporter
- Posts: 106
- Joined: Fri Jul 18, 2008 6:30 pm
- Bike owned: '89 NC30
- Location: Earls Colne, Essex
Re: nc30 screen mounting
Cheers Rob,
I love the way you say 'i seem to remember' and then provide 2 part numbers
I tried them and they didnt work, so ill just get some probolt ones off ebay when i can be bothered.
Matt
I love the way you say 'i seem to remember' and then provide 2 part numbers
I tried them and they didnt work, so ill just get some probolt ones off ebay when i can be bothered.Matt