help nc29 600 needed
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
lloydiecbr
- Site Supporter
- Posts: 271
- Joined: Fri Dec 26, 2008 11:11 pm
- Bike owned: VTR1000
- Location: coventry
help nc29 600 needed
hello im in need of lots of info regarding nc29 with a cbr 600 engine .
a friend of mine want to build one as ive only done an nc23 600 and ive been told they aint the same .
so any help would be great thank you
a friend of mine want to build one as ive only done an nc23 600 and ive been told they aint the same .
so any help would be great thank you
-
kiwi racer
- Settled in member
- Posts: 82
- Joined: Sat Nov 15, 2008 9:10 pm
- Bike owned: CBRs
- Location: New Zealand
Re: help nc29 600 needed
I just finished an NC23 framed 600 F1 , Post Classic racebike , awesome machine winning the first 2 meetings on stock suspendedrs , now fitted with Ohlins and much better hahaha. The good news is mark 2 is being planned now so i cant wait. 110 odd HP and a frame to go round corners.
I looked at an NC29 and wondered if they were wide enough at the spars so i didnt go much further with plans to be honest. Id like to know if it poss without too many frame mods required. Can you get carbs in the gap ?? .
I looked at an NC29 and wondered if they were wide enough at the spars so i didnt go much further with plans to be honest. Id like to know if it poss without too many frame mods required. Can you get carbs in the gap ?? .
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: help nc29 600 needed
I've seen an early blade engine in an nc29 - major frame surgery required!
"It's just a ride" Bill Hicks
-
w00dzy
- Site Supporter
- Posts: 514
- Joined: Sun Oct 12, 2008 10:44 pm
- Bike owned: Aprilia RSVR Mille
- Location: Hampshire
Re: help nc29 600 needed
kiwi - got any pictures? what have you done to that engine?
-
kiwi racer
- Settled in member
- Posts: 82
- Joined: Sat Nov 15, 2008 9:10 pm
- Bike owned: CBRs
- Location: New Zealand
Re: help nc29 600 needed
Sorry for delay in the answering lol.w00dzy wrote:kiwi - got any pictures? what have you done to that engine?
Yes i have heaps of pics taken step by step through the build and after but im not too sure how to load them here.
PM me your email and i can send a few to you if you want. You may feel free to load them for me if you want.
The Mk 1 engine is stock but i have a few bits left over from the Formula 2 days that can manage a good healthy 110 hp without too much worry. Mk 2 is going to be started later this year after the rego runs out , till then im havin fun on the road with it .
In N.Z we have a Post Classic class for Pre 1989 bikes and the Junior cut off is 0-600cc so its a perfect bike for that class. All the rules are based on age so the bike is classed at the age of the newest " major " component , ie , frame engine , swingarm etc so the potential is quit good really. I wish i still had my old HRC Rc 30 that would be fun (a little unfair though lol) . It5s fun playing with the open class bikes in the tight stuff and its not far off the pace down the fast boring bits either.