front sprocket torque settings

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
shokrabi
Settled in member
Posts: 67
Joined: Tue Apr 29, 2008 9:49 pm

front sprocket torque settings

Post by shokrabi » Wed Jul 09, 2008 4:37 pm

Hi, can anyone tell me the front sprocket torque settings and how to lock the engine to undo the sprocket nut. At the mo it just turns the engine over. thanks
Top
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7152
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom

Re: front sprocket torque settings

Post by CMSMJ1 » Wed Jul 09, 2008 4:42 pm

have you got a chain on the bike?

can you get it in 6th gear?

If not, then you might need to use a rag between the clutch basket gear and the motor. it is a pain in the rump dude..

torque settings...pretty tight..but not that tight!
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate
Top
User avatar
RVFHooligan
Familiar Member
Posts: 344
Joined: Tue May 27, 2008 1:40 am
Location: Tampa, FL, USA

Re: front sprocket torque settings

Post by RVFHooligan » Wed Jul 09, 2008 7:09 pm

Front Sprocket 55Nm per Haynes.
My Sponsor? MasterCard, I only wish it was priceless!
Top
shokrabi
Settled in member
Posts: 67
Joined: Tue Apr 29, 2008 9:49 pm

Re: front sprocket torque settings

Post by shokrabi » Thu Jul 10, 2008 12:14 am

cheers guys. All sorted, thanks for replys
Top
Post Reply

Return to “Honda - General”