As per title really. I'm excited as I picked up a used copy off ebay and it's arrived. I've had my 89 NC30 since late last year and have been slowly stripping it of parts to track prepare it but I've got to the point where I need extra guidance and will have start putting stuff back on soon!
Wondering if anyone is local to me incase I get stuck. North Notts/South Yorkshire area? Hopefully it won't come to that but as you can probably tell from some of my other posts I'm not too experienced with the spanners.
My Haynes manual arrived today
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Posts: 155
- Joined: Wed Mar 24, 2010 8:59 pm
- Bike owned: VFR400 NC30
- Location: Lincolnshire
- Sligeach
- Site Supporter
- Posts: 690
- Joined: Wed Apr 30, 2008 4:02 pm
- Bike owned: '90 NC30 - '12 Stripe R
- Location: Sutton, Surrey
- Contact:
Re: My Haynes manual arrived today
i think a lot of ppl will just look at the title of the thread and skip on, change the thread title and i am sure you will get a a better response 

-
- Site Supporter
- Posts: 155
- Joined: Wed Mar 24, 2010 8:59 pm
- Bike owned: VFR400 NC30
- Location: Lincolnshire
Re: My Haynes manual arrived today
Thanks Sligeach but not too bothered. Was just excited about being able to see what I'm doing now.
- NGneer
- Site Supporter
- Posts: 794
- Joined: Wed Jan 21, 2009 7:37 am
- Bike owned: x3 NC30,Matchless G80s AJS16ms
- Location: Köln
Re: My Haynes manual arrived today
Yayyy somone else from the fens.
Where abouts in Lincolnshire are you mate, i am in Lincoln istelf
Where abouts in Lincolnshire are you mate, i am in Lincoln istelf

-
- Site Supporter
- Posts: 155
- Joined: Wed Mar 24, 2010 8:59 pm
- Bike owned: VFR400 NC30
- Location: Lincolnshire
Re: My Haynes manual arrived today
Alright NGneer
. Lincoln isn't the fens, thats Boston and that area isn't it?
I'm back living at my dads place in Gainsborough atm. Going to be for the forseeable future unfortunately
Relationship break up etc etc.

I'm back living at my dads place in Gainsborough atm. Going to be for the forseeable future unfortunately

Relationship break up etc etc.
- NGneer
- Site Supporter
- Posts: 794
- Joined: Wed Jan 21, 2009 7:37 am
- Bike owned: x3 NC30,Matchless G80s AJS16ms
- Location: Köln
Re: My Haynes manual arrived today
OK strictly speaking Lincoln is not in "The Fens" but (appart from Lincoln itself) the place is billiard table flat, so its close enough in my book (brought up with Yorkshire hills)
Give me a shout sometime if you fancy meeting up and taking a run over to the local bike night at Willingham Woods (Market Rasen). Gainsborough is only 30 mins from here and Willingham would be a nice run out.
P.S. Cadwell is only 8 miles from Willingham Woods
Give me a shout sometime if you fancy meeting up and taking a run over to the local bike night at Willingham Woods (Market Rasen). Gainsborough is only 30 mins from here and Willingham would be a nice run out.

P.S. Cadwell is only 8 miles from Willingham Woods

-
- Site Supporter
- Posts: 155
- Joined: Wed Mar 24, 2010 8:59 pm
- Bike owned: VFR400 NC30
- Location: Lincolnshire
Re: My Haynes manual arrived today
Haven't been up to Willingham Woods for at least 5 years, it's not my thing. When I go out on bike I normally head out into North Yorkshire.
P.S. It's fair to say I know Cadwell quite well but thats all I'm saying!
P.S. It's fair to say I know Cadwell quite well but thats all I'm saying!
