Rear exhaust header/manifold

Post by **Tim400GB** » Fri Apr 09, 2010 8:44 pm

paint? zinc coat? zinc coat then paint, satin? gloss? mmm choices choices.

Wonder if the thin zinc coating will be ok on the manifold? Read somewhere that zinc melts at 420degreesC, that PJ1 paint is good upto 500, I wonder how hot the manifold actually gets.

Post by **rcv4** » Tue Apr 13, 2010 12:04 am

i would get a industrial chrome on it,no polishing,would cost you about 20 quid.

Post by **Morespeedvicar** » Tue Apr 13, 2010 12:44 am

I thought that bit was stainless like the rest of it!!! lol. Anyway if its not, wat about getting it ceramic coated inside and out, supposed to help with power as well. Dunno how much it costs tho.
Cheers
Ian

Post by **Neosophist** » Tue Apr 13, 2010 10:49 pm

rcv4 wrote:i would get a industrial chrome on it,no polishing,would cost you about 20 quid.

I'll go with this...

Post by **Tim400GB** » Wed Apr 14, 2010 1:53 pm

Neosophist wrote:
rcv4 wrote:i would get a industrial chrome on it,no polishing,would cost you about 20 quid.
I'll go with this...

I agree

Thanks for the suggestions/input guys

Tim

Rear exhaust header/manifold

Re: Rear exhaust header/manifold

Re: Rear exhaust header/manifold

Re: Rear exhaust header/manifold

Re: Rear exhaust header/manifold

Re: Rear exhaust header/manifold