How to remove the fly wheel?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
hieuphan
Settled in member
Posts: 10
Joined: Tue Mar 02, 2010 12:22 pm
How to remove the fly wheel?

Post by hieuphan »

Hi guys :grin:
Do i need a special tool 07733-0020001?
or is there other way to remove the fly wheel?

Hieu.
User avatar
mattUKNC
NWAA Supporter
NWAA Supporter
Posts: 1075
Joined: Thu May 01, 2008 9:02 am
Bike owned: Fury, NC30, CRF250L and a C90!
Location: Surrey
Re: How to remove the fly wheel?

Post by mattUKNC »

Hi Hieu,
I built something out of 2 strips of metal and a couple of bolts to hold the flywheel in place, then all you need is a large bolt to screw in and pull/ push the flywheel off.
If you're local you're welcome to borrow it. There's probably someone close who has already done the same.
Just let us know where you are, I'm sure someone will come forward. :grin:
Image
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: How to remove the fly wheel?

Post by Neosophist »

The Special tool is an M20 x 1.5 bolt. Remove the bolt thats in the middle of the flywheel and screw that one in to pop it off.

The bolts a bit of an odd thread.. not that uncommon but you may struggle to find one at your local store.

If you can't get them rick O sell them for a pound or two.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

Post Reply