NC24 main fuse and wiring
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
14000rpm
- Settled in member
- Posts: 9
- Joined: Thu Jun 19, 2008 8:27 pm
- Bike owned: NC24, MZ ETZ251, TL1000R
- Location: Northern Germany
NC24 main fuse and wiring
Hello from germany!
I´m rebuilding my NC24 here for the 2nd time. 1 week ago i started it and let it run for 15 minutes to warm it up.
The battery was a bit weak, so i connected a normal car battery too.
Yesterday i wanted to start it up again with a new wiring loom (the old was for racetracks only).
But everytime i connected the plug to the starter relays (near the battery) - the 30A main fuse blew out.
I checked all wirings and didn´t find anything. So i put the old wiring loom in again, to check if the new has a failure - and again the main fuse blew out.
Could that be the regulator/rectifier? Perhaps i destroyed it with the car battery?
Cheers!
Peter
PS: I´m sorry if my english isn´t very well...
I´m rebuilding my NC24 here for the 2nd time. 1 week ago i started it and let it run for 15 minutes to warm it up.
The battery was a bit weak, so i connected a normal car battery too.
Yesterday i wanted to start it up again with a new wiring loom (the old was for racetracks only).
But everytime i connected the plug to the starter relays (near the battery) - the 30A main fuse blew out.
I checked all wirings and didn´t find anything. So i put the old wiring loom in again, to check if the new has a failure - and again the main fuse blew out.
Could that be the regulator/rectifier? Perhaps i destroyed it with the car battery?
Cheers!
Peter
PS: I´m sorry if my english isn´t very well...
-
14000rpm
- Settled in member
- Posts: 9
- Joined: Thu Jun 19, 2008 8:27 pm
- Bike owned: NC24, MZ ETZ251, TL1000R
- Location: Northern Germany
Re: NC24 main fuse and wiring
Hi again.
Now i found the failure: the NEUTRAL SWITCH on the engine has a short.
So now the german-spart-part-problem hits me again. How to find a new switch here in Germany??
Could anyone tell me the part number of it? My Fiche isn´t complet and with google i didn´t find anything yet...
Now i found the failure: the NEUTRAL SWITCH on the engine has a short.
So now the german-spart-part-problem hits me again. How to find a new switch here in Germany??
Could anyone tell me the part number of it? My Fiche isn´t complet and with google i didn´t find anything yet...
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: NC24 main fuse and wiring
35600KE8003
SW.ASSY.,NEUTRAL
SW.ASSY.,NEUTRAL
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
14000rpm
- Settled in member
- Posts: 9
- Joined: Thu Jun 19, 2008 8:27 pm
- Bike owned: NC24, MZ ETZ251, TL1000R
- Location: Northern Germany
Re: NC24 main fuse and wiring
Thanks mate!!
Yesterday in the evening i got a used switch from a VFR750F, it should fit.
Now i hope the little lady will start!!
Yesterday in the evening i got a used switch from a VFR750F, it should fit.
Now i hope the little lady will start!!