Jet sizes with ethos system

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Jason T
Settled in member
Posts: 7
Joined: Sun May 04, 2008 4:45 pm
Jet sizes with ethos system

Post by Jason T »

Can anyone reccomend what jet sizes I should be using with a full Ethos exhaust system?
The rest of the engine is standard stuff. I've just fitted the exhaust and don't want to use the bike too much until I have sorted the fueling out :mrgreen:

Thanks

Jason
User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia
Re: Jet sizes with ethos system

Post by Cammo »

118 front and 120 rear will be fine if it's an nc30.
"It's just a ride" Bill Hicks
Jason T
Settled in member
Posts: 7
Joined: Sun May 04, 2008 4:45 pm
Re: Jet sizes with ethos system

Post by Jason T »

haha, yes I forgot that bit it is an NC30 :mrgreen: Thanks for the help!!

Jason
Jason T
Settled in member
Posts: 7
Joined: Sun May 04, 2008 4:45 pm
Re: Jet sizes with ethos system

Post by Jason T »

I've just stripped the carbs down to see where I'm starting and there is 120's in the front and 122's in the rear :o
Mine is a UK NC30 does that make any difference to the standard jetting? I've checked a spark plug and they look a bit pale. Also it seems a bit flat as the revs get passed 10k-11K. Should I try going up to 122's in the front and 124's in the rear?

Any help much appreciated :mrgreen:

Jason

Post Reply