NC35 Caliper conversion?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
matt_nc30
Thieving Pikey Twat
Thieving Pikey Twat
Posts: 89
Joined: Sun Jul 26, 2009 3:48 pm
Bike owned: NC30, 2000 R1
Location: Swansea, South Wales

NC35 Caliper conversion?

Post by matt_nc30 » Mon Mar 22, 2010 11:40 pm

hi i cant seem to find any brackets for a caliper conversion on an NC35, for the brembo calipers with 65mm mounting centres for instance

Are they available to buy like they are for the NC30?

Cheers
Top
User avatar
micpec
Site Supporter
Site Supporter
Posts: 1298
Joined: Sat May 03, 2008 9:11 pm
Bike owned: NC35’s, NC30 sold, MC34 many
Location: The Netherlands

Re: NC35 Caliper conversion?

Post by micpec » Tue Mar 23, 2010 2:21 pm

Hi there, no brackets can be had to fit 65mm calipers on the NC35. Unlike for NC30 as Rick Oliver can supply these. There are adapters/brackets to fit 40mm brembo's on NC35, but are rarely used.
"Action without Philosophy is a lethal weapon; Philosophy without action is worthless"
Top
matt_nc30
Thieving Pikey Twat
Thieving Pikey Twat
Posts: 89
Joined: Sun Jul 26, 2009 3:48 pm
Bike owned: NC30, 2000 R1
Location: Swansea, South Wales

Re: NC35 Caliper conversion?

Post by matt_nc30 » Tue Mar 23, 2010 2:45 pm

Ok thanks for reply man.
Top
User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia

Re: NC35 Caliper conversion?

Post by Cammo » Tue Mar 23, 2010 8:52 pm

Easy swap is to just bolt on 03-04 600rr / SP1 calipers to the rvf.

Not quite the bling of the brembos but nice bits of gear all the same.
"It's just a ride" Bill Hicks
Top
matt_nc30
Thieving Pikey Twat
Thieving Pikey Twat
Posts: 89
Joined: Sun Jul 26, 2009 3:48 pm
Bike owned: NC30, 2000 R1
Location: Swansea, South Wales

Re: NC35 Caliper conversion?

Post by matt_nc30 » Sat Mar 27, 2010 10:11 pm

Can i keep my NC30 wheel if i fit 35 forks??

& are the CBR600RR/SP1 calipers a straight swap on the NC35 Forks?

Cheers

Matt
Top
User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia

Re: NC35 Caliper conversion?

Post by Cammo » Sun Mar 28, 2010 12:25 am

matt_nc30 wrote:Can i keep my NC30 wheel if i fit 35 forks??
Yes.

& are the CBR600RR/SP1 calipers a straight swap on the NC35 Forks?
Yes.
"It's just a ride" Bill Hicks
Top
Post Reply

Return to “Honda - General”