NC30 steering dampers

[dave_c24]

Here is a pic of my reverse damper setup, if i get enough interest i will run off a batch, ive only done a set at the mo as it took a fair bit of adjustment to get right.

let me know what you think?


lock to lock with no touching. uses the standard 140mm sprint damper slupplied by rick oliver

[matt_nc30]

Im definitely interested!

How much would you be charging for one?

[avinitboys]

Defo be interested in both the cap and the damper clamp. Get busy and I'll spend some money!

[banoffee]

Im definitely interested!

How much would you be charging for one?

+1

[dave_c24]

sorry for the delay in reply, i will get back on to you on the price, need to see how much material etc is for a batch, i just used a off cut for the prototype. would you guys want anodised bits or natural machined finish? probably run a batch off at the end of the month.

[banoffee]

hello. either anodised silver or natural, not too fussed, depends on price I suppose. cheers for doing this.

[matt_nc30]

Same here, machined finish/siliver

[banoffee]

(keenly looks forward to the end of the month )

[dave_c24]

hi guys,

again sorry for the delay, things have been crazy this past week. i will do a damper conversion set up consiting of damper clamp and linkage (bushed i may add to reduce wear) and spacer for £45 anodised silver and i will do some unanodised for those who like bare metal at £40. ive got all the material just got to get the time to machine. i will sell a few on here and then the rest will be sold via Rick Oliver.

once ready i will let you all know.

[banoffee]

thank you