xenon headlights

[jamiep]

Please can someone help i recently bought a set of xenon headlight bulbs for my VFR 400R NC30 however they do not fit the bulbs i was sent i slightly bigger than my originals they are the H4-501 55W bulbs! Does anyone know if these should fit or have i got the wrong ones?

[banoffee]

if you want to fit H4 bulbs to a jap-import NC30 you need to fit a relay and then adapt the bulbs to fit.

am doing this soon...

http://www.vsource.org/VFR-RVF_files/NC ... mRelay.htm" onclick="window.open(this.href);return false;

http://cgi.ebay.com/ebaymotors/H4-Bulb- ... ccessories" onclick="window.open(this.href);return false;

[CMSMJ1]

You need some H4R bulbs from your local bike shop - 35/60 rated I thnk

Welcome to the site..

[cbr400rrn]

http://cgi.ebay.com/ebaymotors/H4-Bulb- ... ccessories" onclick="window.open(this.href);return false;
I bought these adapter rings from that same person. They must be busy as i have recommended her to a few people myself

[Drunkn Munky]

You need some H4R bulbs from your local bike shop - 35/60 rated I thnk

Welcome to the site..

Is that the same for nc35 headlights??

[micpec]

RVF400 standard light bulb is H4R

[Drunkn Munky]

ah i see. so what about xenon bulbs for the 35?

[vfrman]

Yes. H4R is what the NC35 takes as well.

I have fitted a pair of no bullshit HID xenon lights to my NC30. They are bi-xenon with hi/lo and ballasts and ignitors.

I had to use H4 bulbs and modify the headlights to accept them. I also had to shorten the reflector assembly on the bulb itself to get it to fit inside the headlight.

They are bright as hell, and if I had to do it over again, I would have gone with a whiter light (I believe mine are somewhere around 6500K) and would also go all out and figure out a way to install projectors.

[jamiep]

Thanks for all the info its has helped!!! any more uggestions other than fitting a new relay let me no!! thanks

[jamiep]

Do the adapter rings work for the nc30? because it doesent say they are for the nc30 on the ebay link? thanks