NC30 FORKS - HELP!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
force-v4
- Site Supporter
- Posts: 304
- Joined: Fri Jan 01, 2010 9:47 pm
- Bike owned: Far too many now!
- Location: Buckinghamshire
NC30 FORKS - HELP!
Im a bit pissed off while writing this so please bare with me.
PLEASE HELP!
I need an NC30, late type, very good sanction or a fork leg - i dont care about the lower as long as the sanction is clean as a new whistle!
im currently in the middle of stripping my beloved 94' NC30 for some winter love & care & have decided to have the forks rebuilt.
so after speaking to a few people & the odd muppet, ive finally got around to taking the forks out, no problem.
got the old chrome polish out to clean the sanctions prior to me stripping the forks & pulling the bottoms off for powder-coating & realised that 1 of my sanction is ever so slightly bent / kinked, right on the lower yolk clamp edge.
when you run you hand up & down it, you can feel the indentation of the bend.
the other side has clearly been replaced with another leg so not so thats a bonus but now ive got bent sanction!
ive got a spare pair of forks but they are pitted to fook & are only on the bike to hold it up + they are the early type anyway.
are the sanctions sided??? i cant see it myself but i suppose anything is possible.
Cheers, Colin.
PLEASE HELP!
I need an NC30, late type, very good sanction or a fork leg - i dont care about the lower as long as the sanction is clean as a new whistle!
im currently in the middle of stripping my beloved 94' NC30 for some winter love & care & have decided to have the forks rebuilt.
so after speaking to a few people & the odd muppet, ive finally got around to taking the forks out, no problem.
got the old chrome polish out to clean the sanctions prior to me stripping the forks & pulling the bottoms off for powder-coating & realised that 1 of my sanction is ever so slightly bent / kinked, right on the lower yolk clamp edge.
when you run you hand up & down it, you can feel the indentation of the bend.
the other side has clearly been replaced with another leg so not so thats a bonus but now ive got bent sanction!
ive got a spare pair of forks but they are pitted to fook & are only on the bike to hold it up + they are the early type anyway.
are the sanctions sided??? i cant see it myself but i suppose anything is possible.
Cheers, Colin.
-
mattUKNC
- NWAA Supporter
- Posts: 1075
- Joined: Thu May 01, 2008 9:02 am
- Bike owned: Fury, NC30, CRF250L and a C90!
- Location: Surrey
Re: NC30 FORKS - HELP!
I'm sure I remember David Silvers were selling stanchion at a good price a little while ago, I'd give them a go. 
I couldn't see them on DS but wemoto have them;
http://www.wemoto.com/bikes/Honda/VFR_4 ... _-_Single/
Not cheap though...
I couldn't see them on DS but wemoto have them;
http://www.wemoto.com/bikes/Honda/VFR_4 ... _-_Single/
Not cheap though...
