Just curious...
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Chrissy_J
- Settled in member
- Posts: 107
- Joined: Mon Jan 18, 2010 5:54 pm
- Bike owned: VFR400Z NC21
Just curious...
Just as a matter of idle curiosity, would rearsets from a later VFR or RVF fit an NC21?
Normally I'd go and look at a few bikes, tape measure in hand, but I'm housebound for a little while...
The distance between their mounting holes is about 78mm, and they're 10mm diameter, if that helps...
Normally I'd go and look at a few bikes, tape measure in hand, but I'm housebound for a little while...
The distance between their mounting holes is about 78mm, and they're 10mm diameter, if that helps...
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia