Rebuilding Forks
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
racesupplies
- Familiar Member
- Posts: 285
- Joined: Tue Jan 05, 2010 11:42 am
Re: Rebuilding Forks
If you could,I think from memory they are 40 and 25 long.Let me know,I will sort you a drink.
-
Variablevalves suck
- Site Supporter
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: Rebuilding Forks
No problem they are really helpful, a bunch of engineering tech heads that happen to be into xtream sports.
-
Variablevalves suck
- Site Supporter
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: Rebuilding Forks
Regarding TiNi coatings if somebody is serious about getting there forks done if you PM me i will help you out all i can.
Chris.
Chris.
-
abrmoto
- Moderators
- Posts: 728
- Joined: Wed Apr 30, 2008 10:52 pm
- Bike owned: RVFx5,SP1,MV F3,C90,Firestorm
- Location: Wigan
- Contact:
Re: Rebuilding Forks
Kais do all mine, no legs dont need to be new, but do need to be in good condition, if pitted you are wasting money as they will still be pitted but with a nic Ti coating!!
-
racesupplies
- Familiar Member
- Posts: 285
- Joined: Tue Jan 05, 2010 11:42 am
Re: Rebuilding Forks
Do they take the bottoms off,or have I got to do it?
-
abrmoto
- Moderators
- Posts: 728
- Joined: Wed Apr 30, 2008 10:52 pm
- Bike owned: RVFx5,SP1,MV F3,C90,Firestorm
- Location: Wigan
- Contact:
Re: Rebuilding Forks
They take um off, for extra £25 I think it was they powder coat them as well.racesupplies wrote:Do they take the bottoms off,or have I got to do it?
Same as these.
-
Tim400GB
- Site Supporter
- Posts: 753
- Joined: Mon Jan 04, 2010 7:24 pm
- Bike owned: 1 x NC30, 2 x NC32.5,
- Location: SE Greater London
Re: Rebuilding Forks
Kais sound like they are the way to go then. Have emailed them, will post up the result.abrmoto wrote:They take um off, for extra £25 I think it was they powder coat them as well.
Tim
-
GF Racing
- Site Supporter
- Posts: 350
- Joined: Tue Apr 08, 2008 8:52 am
Re: Rebuilding Forks
We have 2 sets - of late model adjustable Honda NC30 fork tubes that have just been hard chrome re plated - in stock.
Top quality work done by HCPG in Newark - been using them for 20 plus years.
£80 a tube outright sale - better than new Honda in my opinion.
UK courier on a pair £12
Paypal as per signature email is best.
Top quality work done by HCPG in Newark - been using them for 20 plus years.
£80 a tube outright sale - better than new Honda in my opinion.
UK courier on a pair £12
Paypal as per signature email is best.
Graeme France - GF Racing UK
UK Warehouse 01652 650142
GF Mobile 07778 628448
email: gfracingtw@live.co.uk
http://www.gfracinguk.com
UK Warehouse 01652 650142
GF Mobile 07778 628448
email: gfracingtw@live.co.uk
http://www.gfracinguk.com
-
Variablevalves suck
- Site Supporter
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: Rebuilding Forks
How much they charge to coat the legs?abrmoto wrote:Kais do all mine, no legs dont need to be new, but do need to be in good condition, if pitted you are wasting money as they will still be pitted but with a nic Ti coating!!
-
abrmoto
- Moderators
- Posts: 728
- Joined: Wed Apr 30, 2008 10:52 pm
- Bike owned: RVFx5,SP1,MV F3,C90,Firestorm
- Location: Wigan
- Contact:
Re: Rebuilding Forks
Best give Nick or Andy a bell, I always had done as part of a full race build, that costs about £350 for reshim/Valve springs, Ti coating and powder coating bottoms, new seals and oil, but has been about 2 years since I had mine done so dont quote me on that.