Binge is Back! NC29 Fork Conversion...
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Faster400
- Settled in member
- Posts: 24
- Joined: Wed Apr 30, 2008 3:03 pm
Re: Binge is Back! NC29 Fork Conversion...
hello binge mate, remember me? Saw you at that roundabout near gravesend, i had the kitted out nc29,...oh and dont forget the appearance of the fuzz lol!
-
binge
- Settled in member
- Posts: 41
- Joined: Sun Jun 15, 2008 8:45 pm
Re: Binge is Back! NC29 Fork Conversion...
Hello mate, Yea, The K-Conversion NC29?
Soo, Any more info on these forks?
Ive been talking to a fitter from watling tyres, he said that the wheel should fit on the spindle, Its just a case of measuring the hubs, Getting some spacers made up that will seat the wheel dead center in the forks.
Then spacing the ZXR calipers so they fit evenly over the NC29 disks?
Sound safe?
Ben
Soo, Any more info on these forks?
Ive been talking to a fitter from watling tyres, he said that the wheel should fit on the spindle, Its just a case of measuring the hubs, Getting some spacers made up that will seat the wheel dead center in the forks.
Then spacing the ZXR calipers so they fit evenly over the NC29 disks?
Sound safe?
Ben
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: Binge is Back! NC29 Fork Conversion...
Here is topic about fitting USD forks to NC23. Just i can be helpful: http://forums.sv650.org/showthread.php?t=84614