Changing NC24 generator...
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Biscuits
- Site Supporter
- Posts: 100
- Joined: Fri Jul 24, 2009 12:56 pm
- Bike owned: '88 NC24
- Location: approaching the apex, carrying too much speed...
Changing NC24 generator...
Ooookay, so I've got a new genny ( muchas grassyass Neo ) now how do I fit it?
I've got the genny cover off and I'm guessing I have to lock the rotor to undo the 14mm bolt? Somehow I've resisted the temptation to ram a screwdriver into it...
I've got the genny cover off and I'm guessing I have to lock the rotor to undo the 14mm bolt? Somehow I've resisted the temptation to ram a screwdriver into it...
Formerly RacingSlug. Felt like a change and it came down to either Biscuits, Ben10 (possible copyright issues) or NinjaSmokeWarrior. The wife suggested TwatMan.
-
mart
- Settled in member
- Posts: 81
- Joined: Thu Oct 01, 2009 10:20 pm
- Bike owned: sp1, sv650, nc30
- Location: ascot
Re: Changing NC24 generator...
did you figure this out then?
-
Biscuits
- Site Supporter
- Posts: 100
- Joined: Fri Jul 24, 2009 12:56 pm
- Bike owned: '88 NC24
- Location: approaching the apex, carrying too much speed...
Re: Changing NC24 generator...
With the help of Neosophist :)
just trying to source an (M20 x 1.5)puller bolt in the ruralness of Uttoxeter...
just trying to source an (M20 x 1.5)puller bolt in the ruralness of Uttoxeter...
Formerly RacingSlug. Felt like a change and it came down to either Biscuits, Ben10 (possible copyright issues) or NinjaSmokeWarrior. The wife suggested TwatMan.
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Changing NC24 generator...
RacingSlug wrote:With the help of Neosophist :)
just trying to source an (M20 x 1.5)puller bolt in the ruralness of Uttoxeter...
Haha I said they were an obscure thread...
Rick O sells them for £1.50'ish.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...