NC29 wheel bearings

[CBR400RR_Repsol]

Hi all

So could someone please explain how many I would need to buy per wheel, what type is best (does it matter?) and if front and back wheel bearings are different?

Thanks everyone
Kev

[Davez29]

I prefer oem but others use aftermarket ok. You will need 2 per wheel and they all have the same part number so guess front and back are the same..

91054MN8741 thats the NSK number, used by Honda

I cant link to the David Silver page for some reason but try there or Graeme France racing.

[CBR400RR_Repsol]

Thank you for the info

GF racing has two types listed on the parts list so a little unclear?

Thank you for the part number tho.

Kev

[GF Racing]

The actual NC29 wheel bearings are all the same ... the 2nd one listed is for the sprocket carrier.

For the wheels only - you require 4 of these:

http://gfracinguk.com/wheel-bearing-6004-ddu-p-389.html

Top quality Japanese bearings as used in our Championship Winning NC29s.

Hope that helps

Cheers

[CBR400RR_Repsol]

Thank you GF for the info...if I'm replacing the wheel bearings is it a good time to replace the sprocket carrier? I've never really heard of this part being replaced.

Thanks again
Kev

[CBR400RR_Repsol]

Also if I did want to replace the sprocket bearing - how many would I need? Thanks

[GF Racing]

Just the one bearing in the sprocket carrier ... I would replace it ... seen these wear out / fail many many times.

Cheers