carb clamps nc30

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
leerc
Settled in member
Posts: 129
Joined: Wed Nov 09, 2011 12:15 pm

carb clamps nc30

Post by leerc » Sat Jan 28, 2012 12:02 pm

in cammos guide it says remove top clamps-mine only has one on each

Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954

Re: carb clamps nc30

Post by Neosophist » Sun Jan 29, 2012 2:41 am

leerc wrote:in cammos guide it says remove top clamps-mine only has one on each
Your NC30 is missing parts then

The carb rubber has two clamps, one to hold it to the engine, one to hold the carbs to the rubber.

Without it the bike will be more prone to air leaks.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

User avatar
lukemillar
Site Supporter
Site Supporter
Posts: 690
Joined: Thu Aug 26, 2010 11:43 pm
Bike owned: '89 NC30 Racebike #24
Location: Wellington, New Zealand

Re: carb clamps nc30

Post by lukemillar » Sun Jan 29, 2012 6:41 am

I have a few spares kicking in the garage. If you PM me you address I'll chuck 4 in the post.

Cheers
Luke

leerc
Settled in member
Posts: 129
Joined: Wed Nov 09, 2011 12:15 pm

Re: carb clamps nc30

Post by leerc » Sun Jan 29, 2012 10:27 am

this is looking like my splutter-i went to my local bike shop to see if i could get some clamps (and failed) and he said it will more than likely be leaking lower down and once it gets to a decent rpm it'll seal itself

Post Reply