Much appreciated, will let you know...
Oh and the bike is starting straight away now with choke.
Electrical Issues
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
RegionX
- Settled in member
- Posts: 136
- Joined: Tue Oct 18, 2011 10:02 pm
- Bike owned: VFR400 NC30
- Location: Cape Town
-
RegionX
- Settled in member
- Posts: 136
- Joined: Tue Oct 18, 2011 10:02 pm
- Bike owned: VFR400 NC30
- Location: Cape Town
Re: Electrical Issues
Okay you were all right from the start 
. I had spoken to the sellers son earlier who said it had been working but the seller called to say it never worked. I will have to replace but it would be nice to know what its from to sell.
I will revive this thread once I've done the mechanical work as the indicators didn't work and I'm not sure where the flicker thing is but I'm sure its in the manual. The rear tail light wires also seem a mess so I'l take pictures. For now I will make use of the guides for checking out the clutch, valve clearances and carbs.
Thanks
. I had spoken to the sellers son earlier who said it had been working but the seller called to say it never worked. I will have to replace but it would be nice to know what its from to sell.I will revive this thread once I've done the mechanical work as the indicators didn't work and I'm not sure where the flicker thing is but I'm sure its in the manual. The rear tail light wires also seem a mess so I'l take pictures. For now I will make use of the guides for checking out the clutch, valve clearances and carbs.
Thanks
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Electrical Issues
The indicators shold be straight forward.RegionX wrote:Okay you were all right from the start
I will revive this thread once I've done the mechanical work as the indicators didn't work and I'm not sure where the flicker thing is but I'm sure its in the manual. The rear tail light wires also seem a mess so I'l take pictures. For now I will make use of the guides for checking out the clutch, valve clearances and carbs.
Thanks
The indicator relay is attached to the rear subframe next to the reg/rec.
Check obvious first like fuse and bulbs.
Sounds like it's been crashed and rebuilt? (would explain clock changes perhaps)?
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
RegionX
- Settled in member
- Posts: 136
- Joined: Tue Oct 18, 2011 10:02 pm
- Bike owned: VFR400 NC30
- Location: Cape Town
Re: Electrical Issues
Yup he took a slide, has a picture of exactly where it ended up. Started working on it but didn't have the cash. The one thing I noticed was that there is a 25A fuse in a 10A slot which I will change asap, the relay makes no sound. Could very well be the switch unit on the handle bar that got a bit damaged (headlight switch works), I will be replacing it so will find out then.