Has anyone installed a factory pro jet kit. I just put one in but the NC30 is now running like crap! After reading the factory pro website I think is is running too rich. I have put the 118 jets in the rear carbs and the 115 jets in the front carbs.
Any suggestions to the jet sizes and needle settings I should try?
Factory Pro Jet Kit
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: Factory Pro Jet Kit
They don't have a good reputation for nc30's - for good reason!
"It's just a ride" Bill Hicks
-
GCD
- Settled in member
- Posts: 31
- Joined: Tue Aug 24, 2010 7:58 am
Re: Factory Pro Jet Kit
So is the suggestion that I return it to standard? Or should I give the smaller 112 jets a go?
-
banoffee
- Site Supporter
- Posts: 1247
- Joined: Sat Aug 01, 2009 7:44 am
- Location: Surrey
- Contact:
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: Factory Pro Jet Kit
Dunno, but The Guru (Rick Oliver) has stated that they don't work well in nc's.GCD wrote:So is the suggestion that I return it to standard? Or should I give the smaller 112 jets a go?
This man is the word...
A modified standard setup would probably perfom better, even better is Rick O's aftermarket road needles.
"It's just a ride" Bill Hicks