How to clean (black) wheels properly?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
silentRVF
Site Supporter
Site Supporter
Posts: 286
Joined: Wed Jul 28, 2010 12:45 am
Bike owned: NC35
Location: Sydney, Australia

How to clean (black) wheels properly?

Post by silentRVF » Mon Sep 20, 2010 10:22 am

Hey guys,

While I have my wheels off I want to give them a really good clean. They have heaps of dust and the like all over the wheel, with heaps of it built up and stuck in the grooves of the spokes.. I have Mothers spray-on Wheel Cleaner which helps but does anyone have any suggestions on how to really give them a really good clean?

Perhaps I should bring out the pressure washer to blast the crap off it? And maybe use a toothbrush or something to get the crap out of the grooves and hard to reach places??

Cheers

User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent

Re: How to clean (black) wheels properly?

Post by Drunkn Munky » Mon Sep 20, 2010 10:27 am

Toothbrush, degreaser and a couple of hours ;)

User avatar
silentRVF
Site Supporter
Site Supporter
Posts: 286
Joined: Wed Jul 28, 2010 12:45 am
Bike owned: NC35
Location: Sydney, Australia

Re: How to clean (black) wheels properly?

Post by silentRVF » Mon Sep 20, 2010 10:37 am

OK cheers, mate? I can't get any degreaser on the seals or bearings though, right?

User avatar
w00dzy
Site Supporter
Site Supporter
Posts: 514
Joined: Sun Oct 12, 2008 10:44 pm
Bike owned: Aprilia RSVR Mille
Location: Hampshire

Re: How to clean (black) wheels properly?

Post by w00dzy » Mon Sep 20, 2010 4:41 pm

Paraffin and about 10 mins per wheel :grin:

Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954

Re: How to clean (black) wheels properly?

Post by Neosophist » Mon Sep 20, 2010 4:58 pm

w00dzy wrote:Paraffin and about 10 mins per wheel :grin:
:plus:
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

lt1bird
Settled in member
Posts: 24
Joined: Wed Aug 04, 2010 12:43 pm
Bike owned: aprilia rs500 rs250 zx14 etc
Location: boston

Re: How to clean (black) wheels properly?

Post by lt1bird » Tue Sep 21, 2010 12:26 am

use wd-40...take off all the grim instantly..then wipe dry.....wax....

CammyGTIR

Re: How to clean (black) wheels properly?

Post by CammyGTIR » Tue Sep 21, 2010 2:51 am

I've had the most success with Mr. Sheen Jonno, try it out, it works just as well for cosmetic detailing. The method I use is spray on liberally, and attack with a toothbrush for the hard to reach places. Then a pressure cleaner to finish them off.

Post Reply