NC29 - Taking apart the instrument panel - speedo / rpm etc.

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
zul_cbr
Settled in member
Posts: 199
Joined: Mon May 26, 2008 1:39 am
Bike owned: 1990 CBR400RR-L NC29
Location: Malaysia
Contact:
Contact zul_cbr

Re: NC29 - Taking apart the instrument panel - speedo / rpm etc.

Post by zul_cbr » Wed Sep 30, 2009 11:15 am

It's completely a one set unit.

this is mine when i took it apart.
Image

get yourself NC23 clocks.
Top
leopard_pagan
Senior Member
Posts: 1184
Joined: Thu May 01, 2008 6:42 am
Bike owned: CBR400/600 Fighter
Location: Mildenhall-Suffolk
Contact:
Contact leopard_pagan

Re: NC29 - Taking apart the instrument panel - speedo / rpm etc.

Post by leopard_pagan » Sat Oct 03, 2009 9:29 am

definite hacksaw job. id cut away the speedo AND lights. id then get 2 LEDs with 12V resistors and make my own "idiot lights" Red= oil, green= neutral, mount a plate where the old speedo was, fit idiot lights there + any other gadgets you may need.
**if you dont know how to make your own idiot lights, email me as i have built/tested these for several people. you pay for parts/my time/postage and i'll even give you wiring instructions for a NC23/29 .not normally over £10-15.

PS if your going to hack a dash.. id buy a 2nd one off ebay/GF to hack. that way the original dash can be fitted back later on if need be.
Top
Post Reply

Return to “Honda - General”