rvf side stand

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
rvfnc35
Site Supporter
Site Supporter
Posts: 53
Joined: Sat Jun 12, 2010 1:00 am

rvf side stand

Post by rvfnc35 » Wed Dec 22, 2010 11:26 pm

I am looking at changing the side stand on the rvf cos i find it leans over a lot , Is there any other stand that will fit straight on and will leave it standing more upright....cheers
Top
User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia

Re: rvf side stand

Post by Cammo » Thu Dec 23, 2010 2:14 am

I used an nc29 stand on my nc30 to cure the same problem, not sure that it will bolt on the same to an nc35 but might do.
"It's just a ride" Bill Hicks
Top
hardnutdvd
Regular Member
Posts: 608
Joined: Fri Jan 01, 2010 8:50 pm
Bike owned: RVF400 NC35
Location: Bedford, Bedfordshire

Re: rvf side stand

Post by hardnutdvd » Thu Dec 23, 2010 8:51 am

i think this has been mentioned, the last i heard it was different fitting on the RVF. i'd be interested to hear if this is 100% correct as the amount of lean on the sidestand is scary!
Top
User avatar
silentRVF
Site Supporter
Site Supporter
Posts: 286
Joined: Wed Jul 28, 2010 12:45 am
Bike owned: NC35
Location: Sydney, Australia

Re: rvf side stand

Post by silentRVF » Thu Dec 23, 2010 9:04 am

I looked into it and the NC29 stand doesn't fit on the NC35.

Not sure what stand will bolt on but if anyone finds out I'd be interested :)
Top
User avatar
rvfnc35
Site Supporter
Site Supporter
Posts: 53
Joined: Sat Jun 12, 2010 1:00 am

Re: rvf side stand

Post by rvfnc35 » Fri Dec 24, 2010 10:54 pm

I might just modify my own and cut it and add in about an inch , I'll let ye's know how i get on ...cheers lads
Top
911f
Site Supporter
Site Supporter
Posts: 37
Joined: Mon Aug 10, 2009 1:39 am
Bike owned: 96 rvf400
Location: Minnesota USA

Re: rvf side stand

Post by 911f » Sun Dec 26, 2010 7:15 pm

I have thought that would be the best fix. take some pics of what you do before and after - would like to see and maybe do the same. good luck.
Top
User avatar
rvfnc35
Site Supporter
Site Supporter
Posts: 53
Joined: Sat Jun 12, 2010 1:00 am

Re: rvf side stand

Post by rvfnc35 » Sat Jan 29, 2011 1:05 am

well lads i cut the stand and added in an inch and its spot on :up:
Top
User avatar
rvfnc35
Site Supporter
Site Supporter
Posts: 53
Joined: Sat Jun 12, 2010 1:00 am

Re: rvf side stand

Post by rvfnc35 » Sat Jan 29, 2011 1:07 am

911f wrote:I have thought that would be the best fix. take some pics of what you do before and after - would like to see and maybe do the same. good luck.
oh and dont know how to put pics up
Top
hardnutdvd
Regular Member
Posts: 608
Joined: Fri Jan 01, 2010 8:50 pm
Bike owned: RVF400 NC35
Location: Bedford, Bedfordshire

Re: rvf side stand

Post by hardnutdvd » Sat Jan 29, 2011 6:22 pm

rvfnc35 wrote:
911f wrote:I have thought that would be the best fix. take some pics of what you do before and after - would like to see and maybe do the same. good luck.
oh and dont know how to put pics up
check here for instructions
viewtopic.php?f=5&t=19475
Top
Post Reply

Return to “Honda - General”