rvf side stand
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
rvfnc35
- Site Supporter
- Posts: 53
- Joined: Sat Jun 12, 2010 1:00 am
rvf side stand
I am looking at changing the side stand on the rvf cos i find it leans over a lot , Is there any other stand that will fit straight on and will leave it standing more upright....cheers
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: rvf side stand
I used an nc29 stand on my nc30 to cure the same problem, not sure that it will bolt on the same to an nc35 but might do.
"It's just a ride" Bill Hicks
-
hardnutdvd
- Regular Member
- Posts: 608
- Joined: Fri Jan 01, 2010 8:50 pm
- Bike owned: RVF400 NC35
- Location: Bedford, Bedfordshire
Re: rvf side stand
i think this has been mentioned, the last i heard it was different fitting on the RVF. i'd be interested to hear if this is 100% correct as the amount of lean on the sidestand is scary!
-
silentRVF
- Site Supporter
- Posts: 286
- Joined: Wed Jul 28, 2010 12:45 am
- Bike owned: NC35
- Location: Sydney, Australia
Re: rvf side stand
I looked into it and the NC29 stand doesn't fit on the NC35.
Not sure what stand will bolt on but if anyone finds out I'd be interested :)
Not sure what stand will bolt on but if anyone finds out I'd be interested :)
-
rvfnc35
- Site Supporter
- Posts: 53
- Joined: Sat Jun 12, 2010 1:00 am
Re: rvf side stand
I might just modify my own and cut it and add in about an inch , I'll let ye's know how i get on ...cheers lads
-
911f
- Site Supporter
- Posts: 37
- Joined: Mon Aug 10, 2009 1:39 am
- Bike owned: 96 rvf400
- Location: Minnesota USA
Re: rvf side stand
I have thought that would be the best fix. take some pics of what you do before and after - would like to see and maybe do the same. good luck.
-
rvfnc35
- Site Supporter
- Posts: 53
- Joined: Sat Jun 12, 2010 1:00 am
Re: rvf side stand
well lads i cut the stand and added in an inch and its spot on 
-
rvfnc35
- Site Supporter
- Posts: 53
- Joined: Sat Jun 12, 2010 1:00 am
Re: rvf side stand
oh and dont know how to put pics up911f wrote:I have thought that would be the best fix. take some pics of what you do before and after - would like to see and maybe do the same. good luck.
-
hardnutdvd
- Regular Member
- Posts: 608
- Joined: Fri Jan 01, 2010 8:50 pm
- Bike owned: RVF400 NC35
- Location: Bedford, Bedfordshire
Re: rvf side stand
check here for instructionsrvfnc35 wrote:oh and dont know how to put pics up911f wrote:I have thought that would be the best fix. take some pics of what you do before and after - would like to see and maybe do the same. good luck.
viewtopic.php?f=5&t=19475