9000 rpm stutter... carbs, jets, etc,.
Posted: Tue Jun 03, 2008 2:08 pm
Hello,
I've now finished putting my project bike together and am trying to sort out the engine and tuning. Accelerating through the gears, I get a stutter at 9000rpm. The reason is probably that I've add Mr France's racing pipe, a titanium end can and a K&N air filter. I'm also guessing that I'll need to change the jetting/carb needles?
My question is - does the stutter around 9000 rpm sound like its being caused by a jetting issue (in turn caused by the new parts), and is the DynoJet Kit the most probable solution which will smooth this out. I'd like to try to avoid having the bike setup on a dyno as the costs are reasonably high.
Thanks,
Bryan
I've now finished putting my project bike together and am trying to sort out the engine and tuning. Accelerating through the gears, I get a stutter at 9000rpm. The reason is probably that I've add Mr France's racing pipe, a titanium end can and a K&N air filter. I'm also guessing that I'll need to change the jetting/carb needles?
My question is - does the stutter around 9000 rpm sound like its being caused by a jetting issue (in turn caused by the new parts), and is the DynoJet Kit the most probable solution which will smooth this out. I'd like to try to avoid having the bike setup on a dyno as the costs are reasonably high.
Thanks,
Bryan