Page 1 of 1
					
				Wanted FZR400 3tj disc or two /
				Posted: Tue Jun 03, 2008 1:17 am
				by Dobbie
				Someone put one of those replacement outer discs on my bike before I got it and it is a loose as.... Even though it has tons of meat on it, it clunks when braking at low speed and it's really starting to annoy me, plus the mot chap said today it's about as loose as he is willing to accept, So anyone got  a good cheap disc or two?? I have been offered one off an fzs 600 for £35.00 plus £6.00 post.Is that a bit steep?
			 
			
					
				Re: Wanted FZR400 3tj disc or two /
				Posted: Tue Jun 03, 2008 9:44 am
				by Taggyd
				do the 3tj discs have an offset, ive got a set of discs that are just flat that dont fit the 3en1, dont know if they are any use?
			 
			
					
				Re: Wanted FZR400 3tj disc or two /
				Posted: Tue Jun 03, 2008 9:56 am
				by Motorcycle Solutions
				Taggy the 3tj1disc are not that far off the 3ens, but taller.....
I have one spare set of fronts and 1  rear if needed.......
Pm me and lets says £50 plus postage and packing total of £60 
If you want them let me have your address details and will post them out before the weekend after recieving funds into pay pal...
PP account 
lajracingservices@yahoo.couk
Chris
 
			
					
				Re: Wanted FZR400 3tj disc or two /
				Posted: Tue Jun 03, 2008 11:49 pm
				by Evilchicken0
				£50 for a pair of disks is reasonable, £35 is cheap. The problem with cheap disks is they can be worn out (to thin) before you get them and so difficult to justify bying them.
Other bike's discs that fit are TRX850, FZR600, FZS600, and FZR400 3EN2 these are basically 300mm Yam discs with the smaller hole.
			 
			
					
				Re: Wanted FZR400 3tj disc or two /
				Posted: Wed Jun 04, 2008 5:54 am
				by Motorcycle Solutions
				Dobbie the ones i have got have very good thickness.... i will measure thickness tonight
			 
			
					
				
				Posted: Wed Jun 04, 2008 10:41 am
				by Taggyd
				the ones ive got dont fit the 1wg so didnt know what they'd fit!