Page 1 of 1
Wanted 3tj front caliper seals
Posted: Mon May 18, 2009 10:20 pm
by dobbslc
As heading, anyone know where to get them from or have you got any for sale?
Re: Wanted 3tj front caliper seals
Posted: Mon May 18, 2009 10:48 pm
by oollit
When i refurbed my 3TJ calipers in June '07, i couldn't find an aftermarket seal kit so i ended up buying genuine Yamaha seals, cost me nearly £100.
2 x Caliper Seal Kits, 3GM-W0047-00 @ £18.47 + VAT each
2 x Caliper Seal Kits, 3MA-W0047-10 @ £17.22 + VAT each
Paul Smeatons "Bits For Bikes" website list a caliper repair kit for the 3TJ but they don't fit, all seals are the same size when there should be 2 large seals and 2 small seals.
Re: Wanted 3tj front caliper seals
Posted: Tue May 19, 2009 7:18 am
by plodder
I don't know if they are the same pistons/seals but the calipers seem very similar to the blue spots as found on the R1/R6, ect.
Worth a look I would have thought?
Re: Wanted 3tj front caliper seals
Posted: Tue May 19, 2009 6:50 pm
by dobbslc
Do the 3EN1 calipers have any of the same seals as I've found some but the part number is 1NL W0047 00? Help....
Re: Wanted 3tj front caliper seals
Posted: Sat May 30, 2009 7:22 pm
by dobbslc
Can anyone double check the part numbers for the small seals on a 3tj front caliper for me? as I've just got some off ebay with the part number 3MA W0047 10 and they are too big. ~I've got some large ones with the part number 3MA W0047 00 above and they are ok???