Can someone please confirm that a shock from a 1995 - 1998 CBR600 F3 will fit directly into my 1992 CBR400 NC29.

Many thanks

Dom

correct

Thank you :)

not without grinding a bit of the linkage out the way first.
the rebound is on the side instead of the back of the shock so will catch/stick,till you grind a section out to allow for it.

Thanks for that. I should be collecting the shock next weekend, but will get it resprung and reconditioned first :)

very easy just use grinding stone on dremmel type tool

Thanks for posting the image

Just FYI. I use FOX Racing shock with adjustable height. Not any drilling at all.

Thanks PARUS.

I will be getting a proper race shock, but at the moment I only have a small budget.

Parus where did you get the FOX shock from ?