Ok i know you can get bungs that fit near the inspection panels, but can you get some to fit any where else on the bike ?

Oh and i am not on about the little crappy ones that fit to the fairing where the bolts go.

Ta Matty.

R+G non-drill FTW!!!

Yes mate thanks for the pics they are the bungs that i know you can get. But are there any other types that can be fitted near the swing arm ?

Also do the non drill type work better then the type that you need to drill the fairing, bearing in mind that these will be going on the bike with track fairing that can be cut ?

It is just that the non cut type are £50 cheaper then the others.

Matty.

I'd say that the ones that mount ont he engine block directly are a liability - not worth the risk of snapping the mounts (even if they are unused)

non drill FTW as Mr VB says..

Not heard of any swingarm ones but am sure you can get something to mount into the hole in the centre of the wheel?

I had some non dril and sold them as I was not happy with them - even chopped my oe fairings for them too..but I was not happy. My new race bike had some bolted to the upper engine mounts and snapped them both off when it was crashed..

ive just bought some off ebay, 24 quid delivered. and if you crash, send back the plastic bit and he will replace them F.O.C (well so he says anyway)

i had to cut the fairing, but they look/fit ok.

ill take some pics tomorrow if you want?

Can you mate and also let m eknow who the seller is ?

Ta Matty

yeh he also sels fork sliders with the same deal, recon he's doing it so he can get feedback on how they crash

just took the pics but aint got time to post em up at the mo
will do it tonight for ya :)

I think this is the Guy

http://cgi.ebay.co.uk/Honda-NC30-VFR400 ... 240%3A1318" onclick="window.open(this.href);return false;

Cheers Smev

yes the ones in Smev's link are the ones i have.











hope these help, but for 24 quid, i dont think ya can go wrong, :)