First of all, appologies if these have been done before. They are all to 'general' to pick up anything with search.

few interchangability questions:

1. Whats needed to put VFR fairings on an RVF?

2. Are NC30 and 35 swing arms different? could i put a vfr swinger on an rvf?

3. Front wheels, im looking for a cheap one for the track, i heard about a 3 spoke nc21 fits (?) are there any others? a list would help loooads

Cheers peeps,
Matt

1. Whats needed to put VFR fairings on an RVF?

Why do you want to do this? It's not a staight swat for the nose and seat but the losers and mids are fine. You will need the RVFsub-frams and the matre stay and mirror bracket

2. Are NC30 and 35 swing arms different? could i put a vfr swinger on an rvf?

Yes they are diggerent and No a VFR swinger will not fit into an RVF as its too wide.

3. Front wheels, im looking for a cheap one for the track, i heard about a 3 spoke nc21 fits (?) are there any others? a list would help loooads

NC21's won't fit, cheapest option is an NC23 three spoke front wheel.

Thanks for your reply!

As for the bodywork, i have found a reasonable set of 2 piece VFR race glass. Thought that it would be a good buy if it was easy to do

And thats a shame about the swing arm because the only rvf swingers i can find seem to be (in my eyes) well over priced, is 80£ really what they normally go for?

Thanks again,
Matt

£80 for a bare swinger is a lot, although if it is inclusive of hub, sprocket, disc or tri-piece and dogbones £80 isn't so bad.

viper_biker wrote:1. Whats needed to put VFR fairings on an RVF?

Why do you want to do this? It's not a staight swat for the nose and seat but the losers and mids are fine. You will need the RVFsub-frams and the matre stay and mirror bracket

2. Are NC30 and 35 swing arms different? could i put a vfr swinger on an rvf?

Yes they are diggerent and No a VFR swinger will not fit into an RVF as its too wide.

3. Front wheels, im looking for a cheap one for the track, i heard about a 3 spoke nc21 fits (?) are there any others? a list would help loooads

NC21's won't fit, cheapest option is an NC23 three spoke front wheel.

You drunk mate?

PMSL, pretending to work and being on the internet will get me in trouble one of these days LOL But I think I got the message accross.

vfrman wrote:

viper_biker wrote:1. Whats needed to put VFR fairings on an RVF?

Why do you want to do this? It's not a staight swat for the nose and seat but the losers and mids are fine. You will need the RVFsub-frams and the matre stay and mirror bracket

2. Are NC30 and 35 swing arms different? could i put a vfr swinger on an rvf?

Yes they are diggerent and No a VFR swinger will not fit into an RVF as its too wide.

3. Front wheels, im looking for a cheap one for the track, i heard about a 3 spoke nc21 fits (?) are there any others? a list would help loooads

NC21's won't fit, cheapest option is an NC23 three spoke front wheel.

You drunk mate?

LMAO = I thought that he was talking in code..

Things being diggerent and swatting losers..lol

The NC21 wheel would be interesting... 16'er albeit 100/90/60 :/