Page 1 of 1
NC30 and NC35 Frame differences
Posted: Thu Jan 22, 2009 6:28 pm
by Drunkn Munky
Apart from the odd visual difference is there any other way the 2 frames differ?
Basically can i just bolt on everything from a NC35 onto a NC30?
Re: NC30 and NC35 Frame differences
Posted: Thu Jan 22, 2009 6:30 pm
by CMSMJ1
As far as I know
Engine mounts - you will have to tap your lower VFR engine mounts to bolt it in.
swingarms
headstock
possible sidestand moutings
subframe
are all different and would not be a straight swap.
Why? Have you picked up a cheap RVF frame on it's own?
Re: NC30 and NC35 Frame differences
Posted: Thu Jan 22, 2009 6:41 pm
by Drunkn Munky
No not quite, my RVF Trackbike has a real tatty frame and i picked up a very clean VFR frame for nowt so i thought about swapping all the gear over if its not too much hassle.
If its gunna be hassle i think id rather just build up the VFR frame as a road bike collecting parts as i go, see how cheap i can build a complete bike for. So anyone with any VFR parts they want to donate feel free to pass them on
Re: NC30 and NC35 Frame differences
Posted: Thu Jan 22, 2009 6:59 pm
by viper_biker
Top rad mouning is different too.
Re: NC30 and NC35 Frame differences
Posted: Thu Jan 22, 2009 10:17 pm
by CMSMJ1
ref the VFR parts.. I am going to have a clearout to raise some dollar so might have some stuff for you. Will take some pics
btw - cheers for the tyre pics - metz for the win!