Hi,

Im really hoping someone can shed some light on this issue

I have a 92 400 super four jap import i have just bought 4 LED indicators fitted them only to find out that i now cant get them to work, i was told that it was the flasher i had to change cos i was now using LEDs so i bought a universal flasher unit for LED indicators, the problem i now have is that when i select left or right all four flashers flash

I am totally totally baffled and frustrated by this, please someone help

the wires i have are as follows

rear:
green with twin bullet female
orange single female bullet
light blue single female bullet connector


Front:green twin bullet connector female
2x light blue wires one of which seems to be constant
2x orange one of which seems to be also constant

i would appreciate n e help with this sooooooo much

n1ch0l@s wrote:Hi,

Im really hoping someone can shed some light on this issue

I have a 92 400 super four jap import i have just bought 4 LED indicators fitted them only to find out that i now cant get them to work, i was told that it was the flasher i had to change cos i was now using LEDs so i bought a universal flasher unit for LED indicators, the problem i now have is that when i select left or right all four flashers flash

I am totally totally baffled and frustrated by this, please someone help

the wires i have are as follows

rear:
green with twin bullet female
orange single female bullet
light blue single female bullet connector


Front:green twin bullet connector female
2x light blue wires one of which seems to be constant
2x orange one of which seems to be also constant

i would appreciate n e help with this sooooooo much

How are you at uploading pics? I'd like to se what the flasher unit you've bought looks like.

not very good, dunno how to, its a GT Moto branded flasher unit and i bought it from halfords, if this helps

I had this issue fitting the same flasher unit to a kwak, I seem to remember it was something to do with the either the earths or I still needed some additional resistance try wiring a normal indicator on each circuit aswell this is how mine is now !