Hi guys, was wondering if anyone has some instructions / parts list for the headlight highbeam mod?
all help is highly apreciated

many thanks and merry christmas
Adam.

merry christmas mate.....

i would have thought your bike would have had a high beam relay fitted!!!!

it is usually a low beam relay that is not fitted and is usually needed for running uk spec bulbs,when you use your lights and you put the full beam on do you get a clicking noise?

if you do then this is the relay you hear clicking.

the reason jap imports already have a full beam relay is jap spec bulbs are 60/35 so the full beam wattage is the same as uk spec so they require a relay for full beam but because the low beam is only 35w then they do not need a low beam relay.

i would first double check that you definately do not have the full beam relay,just check for the clicking noise whilst putting full beam on




william

ah, you've got me there m8. that must be what i meant lol as i know theres something to be done to the headlights...
any help with that is highly apreciated :D

there was a thread on here somewhere with a guide to doing the low beam relay,i think it is quite universal....not bike specific.i will try and find it but i know someone will give good info on this.



william

http://www.400greybike.cc/newforum/view ... +relay+mod" onclick="window.open(this.href);return false;

on the first page there is a diagram for doing the mod,it is on the diagram for the nc30 but it should give you a good idea.

funnily enough the thread was started by myself


william

thanks wullvfr, will be looking into the mod at some point within the next few months :)

once again many thanks and merry christmas

no problem at all

merry christmas


william