Hi all,

Having stripped my forks and being ready to rebuild I have notes a few issues.

For reference the drawing I am using is here: https://images.cmsnl.com/img/partslists ... 9_0360.gif

Firstly, the right fork does not have an aluminium cone but what can only be described as a plastic bush. I guess it was doing the job but don't know if this is correct. I can see from the drawing that the one side has an aluminium cone and the other is different (item 15)?

Second when I stripped the forks parts 18 and 19 were not present. I have noted on the site the drawing is off these are not actually listed as spares on their site so are these nor actually used?

Any advice much appreciated.