Painting motorcycle tank

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Qusauel
One Hit Wonder
Reactions:
Posts: 1
Joined: Tue Nov 19, 2019 8:37 am
Location: Santa Clara
Painting motorcycle tank

Post by Qusauel » Wed Nov 20, 2019 10:13 am

I plan to paint a new motorcycle tank. I am starting with bare metal. I plan to put a skim coat of evercoat metal to metal filler first to get it smooth. I am going to paint with nason single stage. What kind of etching primer would you use to start? After that, do I need another coat of regular primer before I put on the color or can I lay a coat of color on the etching primer. I have never done single stage with bare metal. Who can give useful advice about good paint?
THANKS!!!!
Last edited by Qusauel on Fri Nov 29, 2019 9:26 am, edited 1 time in total.

Evilchicken0
Site Supporter
Site Supporter
Reactions:
Posts: 9424
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: Painting motorcycle tank

Post by Evilchicken0 » Sun Nov 24, 2019 12:41 am

I dont know ' but I'm not sure id put the metal to metal filler on. I'd use etching primer then knifing or fine filler on any small imperfections drop a hybuild primer over that and flatten it back.
Ask your paint supplier what they recommend


Post Reply