have fitted cbr6 shock to my nc29 is there a stand that will bolt straight on, dont fancy going down the cut and weld route, seen a post on here a while back but cant find it about a replacment from another bike

I used a 98 fireblade stand on my CB-1 - hope these pictures help

http://i74.photobucket.com/albums/i264/ ... _A0026.jpg" onclick="window.open(this.href);return false;
http://i74.photobucket.com/albums/i264/ ... _A0027.jpg" onclick="window.open(this.href);return false;
http://i74.photobucket.com/albums/i264/ ... _A0030.jpg" onclick="window.open(this.href);return false;
http://i74.photobucket.com/albums/i264/ ... _A0031.jpg" onclick="window.open(this.href);return false;
http://i74.photobucket.com/albums/i264/ ... _A0005.jpg" onclick="window.open(this.href);return false;
http://i74.photobucket.com/albums/i264/ ... _A0006.jpg" onclick="window.open(this.href);return false;
http://i74.photobucket.com/albums/i264/ ... _A0007.jpg" onclick="window.open(this.href);return false;
http://i74.photobucket.com/albums/i264/ ... _A0008.jpg" onclick="window.open(this.href);return false;

I just keep a small piece of lumber (a 2x4 about 4" long) in the trunk. But I've been told CBR600 sidestands bolt right in and are a couple inches longer.